Fire Sprinkler Corrosion Assessment

Know exactly what is happening inside your piping before you approve a repair. Corrosolve's assessment combines water analysis, internal video inspection, and wall thickness testing into one written report.

Request an Assessment

What Is a Fire Sprinkler Corrosion Assessment?

A fire sprinkler corrosion assessment is a structured investigation of a system's water quality, internal pipe condition, and degree of impairment. Its purpose is to answer the questions that repair invoices and replacement quotes usually leave open: what is causing the problem, how much of the system is affected, and what actually needs to be done.

It is the first step of Corrosolve's three-step approach and the foundation for every recommendation that follows. You can see how it fits into the full process on our services page.

What We Assess

  • Water quality and chemistry. Sampling and analysis to understand conditions that influence corrosion.
  • Internal video inspection. A serpentine borescope lets us see the inside of the piping instead of guessing from the outside.
  • Ultrasonic wall thickness testing. Measurements of the remaining pipe wall to show where metal has been lost.
  • Degree of MIC infection and impairment. How far microbiologically influenced corrosion has progressed and where.
  • Scope of necessary repairs. A defined view of what must be repaired or replaced, and what does not.

Why Borescope and Ultrasonic Testing Matter

Corrosion happens on the inside of the pipe, where it can't be seen from the ceiling. A video inspection with a serpentine borescope gives a direct view of internal conditions and helps substantiate the extent of an infection and any potential impairments.

Ultrasonic testing adds measurements. By checking pipe wall thickness, we can identify thinning that isn't visible on the surface, which helps separate sections that need attention from sections that are performing well.

Together, these tools turn a general concern into specific, documented findings.

What You Receive

Every assessment ends with documentation designed to be used by owners, managers, and contractors alike:

  • A written Assessment Report with findings and associated risk factors.
  • High-resolution borescope imagery with narrative commentary.
  • Documentation of standout physical evidence.
  • Root cause identification and contributing factors.
  • Strategic remediation recommendations, including targeted pipe replacement, corrosion mitigation and control measures, and design enhancements where warranted.
  • Annotated sprinkler system drawings with color-coded legends for communicating with contractors.

What We Look For Inside the Pipe

Corrosion has several causes, and the right fix depends on identifying which ones are at work. During an assessment we look for signs of:

  • Oxygen cell corrosion, the most common form, where steel, oxygen, and water react to produce rust.
  • Cathodic corrosion, which can relate to inadequate grounding or contact with dissimilar metals.
  • MIC, where microbes form biofilms and create a corrosive environment on the pipe surface.
  • System conditions that contribute, such as pH, nutrients, temperature, low flow, oxygen levels, and poor air release.

Active MIC infections continue spreading unless treated, so understanding where they are and how far they have progressed is central to the plan. Our page on what MIC is explains the different types of corrosion in more detail.

An Assessment Compared With a Contractor's Quote

A repair or replacement quote tells you what a contractor intends to do and what it will cost. An assessment answers an earlier question: what is wrong, and how much of the system is affected? The two work well together. When bids are based on a defined, documented scope, owners and managers can compare proposals fairly and avoid paying for work the facts don't support.

Annotated drawings with color-coded legends show contractors exactly where the recommendations apply, which minimizes the administrative burden of bidding out repairs.

If you have already received a replacement recommendation, read our guide on what to ask before approving fire sprinkler system replacement.

When to Schedule an Assessment

An assessment makes sense whenever you need facts before spending money. Typical triggers include:

  • Repeat leaks, especially pinhole leaks in the same areas.
  • Dark, foul-smelling, or discolored water in the system.
  • A contractor recommending a full replacement without detailed supporting evidence.
  • Water damage or tenant complaints tied to sprinkler leaks.
  • An inspection that flags internal pipe conditions.
  • A property acquisition or planning cycle where you want to understand system condition.

What Happens After the Assessment

Corrosolve doesn't hand over a report and disappear. Post-assessment support includes coordination meetings with contractors to define the scope of work, consultations with ownership or management as needed, and post-construction verification that completed work matches the defined scope.

Once repairs are complete, the Corrosion Control Program helps keep corrosion from returning. Property owners and managers can read more about how we work on our owners and managers page.

Frequently Asked Questions

What is included in a fire sprinkler corrosion assessment?

An assessment includes water quality and chemistry analysis, internal video inspection with a serpentine borescope, ultrasonic pipe wall thickness testing, an evaluation of the degree of MIC infection and impairment, and a defined scope of necessary repairs.

What is a serpentine borescope?

A serpentine borescope is a flexible video inspection tool that can be guided through piping to show internal conditions. It lets us document corrosion, buildup, and other issues without relying on assumptions.

Why is ultrasonic testing used?

Ultrasonic testing measures the thickness of the pipe wall. It helps identify areas where metal has been lost, which supports decisions about which sections of piping need repair or replacement.

Will an assessment tell me whether I need to replace my entire system?

It will show the extent and location of damage so replacement decisions rest on evidence. MIC is typically localized, and the assessment identifies which sections are irreparable and which are not.

What documents do I receive?

You receive a written Assessment Report, high-resolution internal images with commentary, root cause identification, remediation recommendations, and annotated drawings with color-coded legends.

Get the Facts Before You Fix

Request a corrosion assessment and find out what is really happening inside your fire sprinkler piping.

Request an Assessment